Risk assessment for a robot near the public: the ISO 12100 method explained
A plain-language walk through the machinery risk-assessment method behind ISO 12100 and EU law, using a walking robot in a crowd as the worked example.
Par Rédaction de humanoid4rent · publié le 17 novembre 2026
ISO 12100 sets out the general method machinery designers use to find hazards and reduce risk. For a humanoid or robot dog at a public event, it works like this: define how the robot will be used and misused, list what could hurt someone, estimate how bad and how likely each harm is, and reduce the risk in a fixed order. Design comes first, then safeguards, then warnings. This article walks through each step with a walking robot in a crowd as the example.
It is general information, not legal advice. Your obligations depend on your role, your country and the contract.
Two risk assessments, not one
People often talk about "the risk assessment" as if there were only one. For a robot at an event there are normally two, written by different people for different purposes.
The first is the manufacturer's design risk assessment. Under the EU Machinery Directive, the manufacturer must make sure a risk assessment is carried out to work out which health and safety requirements apply to the machine, according to Directive 2006/42/EC on machinery. This is the assessment ISO 12100 is written for.
The second is the workplace or event risk assessment, prepared by whoever runs the activity: the supplier, the organiser, the venue, or all three working together. UK guidance from the Health and Safety Executive describes five steps: identify hazards, assess the risks, control them, record the findings and review them. It also says employers with five or more staff must record their significant findings, including who might be harmed, and that this covers visitors and members of the public, according to HSE's steps for managing risk.
The two documents should fit together. The event assessment relies on the limits and residual risks named in the manufacturer's assessment. It should not invent its own view of what the robot can safely do.
Where ISO 12100 fits
ISO 12100 is titled Safety of machinery – General principles for design – Risk assessment and risk reduction. The US Occupational Safety and Health Administration lists it among the standards relevant to robotics, next to the industrial robot standards ISO 10218-1 and -2, on its robotics standards page. It is a general standard, not a robot-specific one. More specific standards, such as the ISO 10218 revision and the draft ISO 25785-1 for legged robots, build on this kind of general method.
The full text of ISO 12100 is a paid document. The walkthrough below therefore follows the sequence as EU machinery law writes it, which is what a design risk assessment has to satisfy in Europe.
Step 1: Set the limits of the machine
The Directive's Annex I says the manufacturer must first determine the limits of the machinery, including its intended use and any reasonably foreseeable misuse, according to Directive 2006/42/EC.
For a legged robot in a crowd, the limits might cover:
- Use limits: walking demonstrations, greeting visitors, posing for photographs, with one trained operator in control.
- Space limits: the floor area the robot may enter, the clear zone around it, surface type and slope.
- Time limits: session length, battery changes, cool-down and maintenance between shows.
- Foreseeable misuse: a child hugging the robot, an adult pushing it to test its balance, someone stepping into its path while filming on a phone, a visitor trying to climb on a robot dog.
Foreseeable misuse is the part event teams most often leave out. The law is clear that it belongs in the assessment, not just intended use.
Step 2: Identify the hazards
Next comes identifying the hazards the machine can create and the hazardous situations around them, according to the Directive's general principles. A hazard is something that can cause harm. A hazardous situation is a person being exposed to it.
For our example, a credible list would usually include:
- the robot falling onto someone, or its legs or arms striking a person;
- fingers pinched in moving joints, or contact with hot surfaces after long running;
- a fall caused by a slippery floor, a cable or someone pushing it;
- loss of control, for example a dropped radio link between operator and robot;
- people tripping over cables or charging equipment;
- battery hazards during charging, transport and storage;
- crowd behaviour: people surging towards the robot, or children reaching its feet.
The list should be specific to the model being used. A small robot dog and a full-size humanoid share categories, but not the size of the risk.
Step 3: Estimate the risk
For each hazard, the Directive asks the manufacturer to estimate the risk by considering how severe the injury could be and how likely it is to happen, according to Directive 2006/42/EC.
In practice, likelihood depends on exposure: how many people are near the robot, how often and for how long. A robot walking through an open crowd for four hours differs from one standing behind a barrier for ten minutes, even though the machine is the same. That is why the event layout matters as much as the robot's specification sheet.
Many teams use a simple scoring grid. That is acceptable, provided each score has a written reason. A grid of numbers with no explanation is hard to defend afterwards.
Step 4: Evaluate whether the risk is acceptable
Evaluation means deciding, for each risk, whether it has to be reduced further, according to the Directive's Annex I. The process is iterative. After each control measure is added, the risk is estimated again, and any new hazards the measure creates are checked. A barrier, for example, can itself become a trip hazard.
Step 5: Reduce the risk in the right order
This step has a fixed order of priority. The Directive requires designers first to eliminate or reduce risks as far as possible through inherently safe design. Next, they take protective measures for risks that cannot be removed. Last, they inform users about the residual risks, including any training or protective equipment needed, according to section 1.1.2 of Annex I.
Applied to the walking robot, the order looks like this:
- Design: lower walking speed limits, padded or rounded surfaces, joint torque limits. These belong to the manufacturer and are not something an event team should change.
- Protective measures: an emergency stop the operator can reach at once, safety-rated stop functions where the robot has them, and a physical exclusion zone. Our explainer on e-stops and ISO 13849 covers how stop functions are rated.
- Information: operator training, signs, a spoken briefing for visitors, and stewards who keep people at the agreed distance.
An assessment that relies mainly on signs and "please keep your distance" has the order upside down.
What changes under the Machinery Regulation
The EU Machinery Regulation (EU) 2023/1230 will apply from 20 January 2027. Until then, machinery must comply with Directive 2006/42/EC, according to the European Commission's machinery page. The Commission says a full application guide is expected during 2027.
The Regulation keeps the risk-assessment duty, and its recitals add a point that matters for software-driven robots. The manufacturer's risk assessment should also cover future software updates or developments that are foreseen when the machine is placed on the market, according to recital 32 of Regulation (EU) 2023/1230. For a robot whose behaviour is changed through updates, "what version was assessed" becomes a fair question to ask.
The Commission also says a new list of harmonised standards under the Regulation is being prepared, according to its Machinery Directive standards page. Which standards will give a presumption of conformity under the new law is therefore still being settled. Our article on the Machinery Regulation and humanoid robots covers the wider changes.
What a credible assessment document contains
The Directive's technical file requirements give a useful model. The documentation should describe the risk-assessment procedure followed, list the health and safety requirements that apply, describe the protective measures taken and name the residual risks, according to Annex VII of Directive 2006/42/EC. Organisers do not usually receive the manufacturer's technical file. An event-level assessment can still follow the same structure:
- robot model, software version and operating mode (teleoperated, scripted or autonomous);
- the use, space and time limits, and the foreseeable misuse considered;
- a hazard list with severity, likelihood and a written reason for each;
- the control measures, grouped as design, protective and information;
- the residual risks, stated plainly, with who is responsible for managing each;
- the stop procedure and who may trigger it;
- name, date and the trigger for review, such as a layout change or a new software version.
For small organisations, EU-OSHA offers a free online tool, OiRA, that guides micro and small enterprises step by step through workplace risk assessment. It does not replace the manufacturer's design assessment.
What this means for event organisers
- Ask the supplier for the robot's limits and residual risks in writing, and build your event assessment on them. Our guide on what to put in a supplier brief lists the questions.
- Write down foreseeable misuse. Pushing, hugging and stepping into the robot's path are predictable at public events and belong in the document.
- Check the order of controls. Barriers, stop functions and trained operators should come before signs and announcements.
- Record the software version and review the assessment after updates or layout changes.
- Agree who owns each residual risk between supplier, venue and organiser before the day. The public event safety planning guide covers the site side.
Frequently asked questions
Does an event organiser have to carry out an ISO 12100 risk assessment?
Usually not. ISO 12100 is written for people who design machinery, so the design risk assessment belongs to the robot's manufacturer. An organiser, supplier or venue normally prepares a separate assessment for the activity itself, covering the layout, the audience and the staff. That assessment should build on the limits and residual risks the manufacturer has stated. This is general information, not legal advice; check the duties that apply in your country.
What is reasonably foreseeable misuse for a robot at an event?
It means ways people are likely to use or treat the robot that differ from what was intended, but that can be predicted. At public events, typical examples are visitors pushing a humanoid to test its balance, children hugging or grabbing it, people stepping into its path while filming, or someone trying to sit on a robot dog. EU machinery law says the limits of a machine include this kind of misuse, so it belongs in the risk assessment.
Why are warning signs not enough to control a robot's risks?
EU machinery law sets an order of priority. Risks should first be removed or reduced through safe design, then controlled with protective measures such as guards, stop functions or exclusion zones, and only then addressed with information and warnings about what remains. Signs depend on people noticing and obeying them, which is unreliable in a crowd. They are a useful last layer, not the main control.
Does the EU Machinery Regulation change robot risk assessment?
Regulation (EU) 2023/1230 applies from 20 January 2027 and keeps the manufacturer's duty to carry out a risk assessment. Its recitals add that the assessment should cover software updates or developments foreseen when the machine is placed on the market. For robots whose behaviour changes through updates, it is sensible to record which software version an assessment refers to. This is general information, not legal advice.
How this article was made: written by the humanoid4rent editorial team with AI assistance; every factual statement was checked against the sources listed below on 2026-11-17. Spotted an error? Write to info@humanoid4rent.com.
Sources
Les faits présentés dans cet article ont été vérifiés à partir de ces pages le jour de sa rédaction.
- Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery – EUR-Lex
- Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery – EUR-Lex
- Machinery – European Commission, Internal Market, Industry, Entrepreneurship and SMEs
- Machinery (MD) – European Commission, Internal Market, Industry, Entrepreneurship and SMEs
- Robotics – Standards – Occupational Safety and Health Administration
- Steps needed to manage risk – Health and Safety Executive
- OiRA – Online interactive Risk Assessment – EU-OSHA
Autres articles du blog
Vous souhaitez un robot lors de votre prochain événement ?
Décrivez une seule fois la date, le lieu et la mission du robot. Les fournisseurs vous répondent par des devis que vous pouvez comparer à critères égaux.
Envoyer une demandeVous travaillez dans la robotique ? Écrivez pour notre blog. →