humanoid4rent
AccessoRichieda preventivi

Machinery Regulation and self-learning robots: which standards will count, and when

The Machinery Regulation sets strict rules for robots whose safety functions rely on machine learning. Here is where the matching harmonised standards stand, and the stopgap the AI Omnibus added.

Di Redazione di humanoid4rent · pubblicato il 11 novembre 2026

Questa pagina non è ancora stata tradotta
Sta leggendo il testo inglese perché non esiste ancora una versione in Italiano. Non è stato omesso nulla: questa è la pagina intera, nella lingua in cui è stata scritta.

As of November 2026, no harmonised standard listed under the EU Machinery Regulation deals specifically with machines that learn. The Commission has asked for new standards and is preparing the first list under the Regulation. A July 2026 amendment lets manufacturers use AI Act harmonised standards in the meantime. Robots whose safety functions rely on machine learning still need a notified body, whatever standards exist.

This article covers the part of Regulation (EU) 2023/1230 that deals with self-evolving behaviour, and the standards meant to support it. For the wider changes the Regulation brings, see our overview of what the Machinery Regulation changes for humanoid robots and robot dogs.

What the Regulation means by self-evolving behaviour

The Regulation does not regulate artificial intelligence in general. It picks out one specific case: machinery or safety components with "fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions". In plain terms, this is software that learns or adapts and is responsible for keeping people safe, for example by deciding when to slow down or stop.

The recitals explain why. They name data dependency, opacity, autonomy and connectivity as features that can make harm more likely and more serious. They also draw a clear line: software that cannot learn and only executes programmed automated functions is not caught by the third-party assessment rule.

Two entries in Annex I, Part A cover this:

  • point 5: safety components with self-evolving behaviour that ensure safety functions, including when they are sold on their own;
  • point 6: machinery with such systems built in that were not placed on the market separately, "in respect only of those systems".

The second point matters for robot makers. Only the learning safety system goes to the notified body, not the whole machine.

The requirements a learning robot must meet

Annex III, the list of essential health and safety requirements, has several passages written with adaptive, autonomous machines in mind:

  • Risk assessment (section 1.1.2). The manufacturer must include hazards that can be foreseen at the time of sale as an intended evolution of the machine's self-evolving behaviour over its lifecycle.
  • Ergonomics (section 1.1.6). Where relevant, such machines should respond to people appropriately, verbally or through gestures and movement. They should also explain to operators, in a way they can understand, what they are about to do and why.
  • Control systems (section 1.2.1). A machine with self-evolving logic must not act beyond its defined task and movement space. It must record data on its safety-related decisions and keep that data for one year, for use only if a national authority asks for it. It must also be possible to correct the machine at any time to maintain its inherent safety.
  • Learning phase limits. The same section bars changes to settings or rules made by the machine or its operators, including while it is learning, where those changes could lead to hazardous situations. Logs of interventions and of safety software versions uploaded after sale must be available for five years.

These requirements say what must be achieved, not how to test it. Harmonised standards are meant to fill that gap.

How presumption of conformity works

Under Article 20 of the Regulation, a product that follows a harmonised standard whose reference has been published in the Official Journal is presumed to meet the requirements that standard covers. The Commission must ask the European standardisation organisations to draft those standards.

If standards do not arrive, Article 20(3) allows the Commission to adopt common specifications by implementing act instead. This is a fallback with conditions. The Commission must already have issued a request that was refused, missed its deadline or produced standards that do not match it. No suitable standard must be expected within a reasonable period.

Two further points are worth knowing:

  • Following standards is voluntary. A manufacturer may use other technical solutions if it shows in the technical file that the requirements are met.
  • Article 20(9) offers another route for section 1.2.1, as far as protection against corruption is concerned. Machinery certified under an EU cybersecurity certification scheme is presumed to comply with those parts of sections 1.1.9 and 1.2.1 that the certificate covers.

For learning safety systems there is an important limit. Because they are listed in Annex I, Part A, Article 25(2) requires EU type-examination, full quality assurance or unit verification. All three involve a notified body. A harmonised standard would make that assessment more predictable, but it does not remove it.

Where the machinery standards stand

Article 20(2) obliges the Commission to request harmonised standards for the Regulation's requirements. Notified bodies' guidance documents published by the Commission refer to the resulting implementing decision as C(2025)129. We could not open the text of that decision for this article, so we do not report its deadlines or list of deliverables here.

On its harmonised standards page for machinery, the Commission says a new implementing decision listing standards under the Regulation is being prepared. It says the list will carry over most standards currently cited under the old Machinery Directive, with clarifications where those standards do not yet address the updated requirements. A quick search of EUR-Lex on 11 November 2026 did not turn up such a decision.

The most recent list update, Implementing Decision (EU) 2026/2015 of 4 September 2026, was still issued under Directive 2006/42/EC. It is based on the older requests M/396 and M/471, which predate the self-evolving requirements.

The 2026 work programme gives a further hint. It plans a request for lift standards covering cybersafety and self-evolving behaviour, to be coordinated with requests under the Machinery Regulation, the AI Act and the Cyber Resilience Act.

The practical conclusion is that carried-over Directive-era standards are unlikely to cover the self-evolving paragraphs of section 1.2.1. As far as we could confirm, no machinery standard written for that purpose has yet been cited.

The AI Omnibus stopgap

Regulation (EU) 2026/1744, the Digital Omnibus on AI, was signed on 8 July 2026 and published on 24 July 2026. It changes how the AI Act and the Machinery Regulation fit together in three ways:

  1. It moves machinery from Section A to Section B of Annex I to the AI Act. As a result, only a few AI Act provisions apply directly to AI in machinery, and AI safety for machinery is handled mainly through machinery law.
  2. It adds a new duty to Article 8 of the Machinery Regulation. The Commission must adopt delegated acts that add AI requirements to Annex III, reflecting the AI Act's high-risk rules and its Articles 17, 19, 72 and 73. Those delegated acts must apply by 2 August 2028.
  3. It adds Article 20(10). Until machinery-specific AI standards or common specifications exist, high-risk AI systems that follow harmonised standards or common specifications under the AI Act are presumed to meet the Annex III AI requirements.

The stopgap relies on AI Act standards, which are themselves late. See our report on where CEN-CENELEC stands on the AI Act harmonised standards. How Article 20(10) relates to the self-evolving requirements already in section 1.2.1 is not spelled out in the amendment. Official guidance is likely to be needed on that point.

What notified bodies and the Commission guide say so far

The European coordination of notified bodies for machinery has issued recommendations for use, endorsed by the Machinery Expert Group on 7 November 2025:

  • For Annex I, Part A, point 6, only the embedded learning system is assessed, not the complete machine.
  • A machinery notified body covering points 5 and 6 may check the AI Act's high-risk requirements without being a full AI Act notified body, as long as it meets certain AI Act requirements for notified bodies.

Both sheets predate the Omnibus and may be revised.

The Commission's temporary and partial guide to the Regulation, endorsed through a written procedure that ended on 5 November 2026, covers protection against corruption and the cyber-safety points (a) and (f) of section 1.2.1. It does not yet cover the self-evolving paragraphs.

The Regulation applies from 20 January 2027. The corrigendum published in July 2023 replaced the date of 14 January 2027 that was printed originally.

Does this apply to robots at events?

Only where machine learning actually performs a safety function. Many robots use learned controllers for walking or gestures, while protective stops, speed limits and emergency stops run on conventional, non-learning logic. Whether a particular robot falls under Annex I, Part A depends on that design, and the decision rests with the manufacturer and, where involved, the notified body. This article is general information, not legal advice.

CE marking alone does not tell you which route was used. See what CE marking on a robot does and does not tell you.

What this means for event organisers

  • Ask what the safety functions run on. A supplier should be able to say whether stopping, speed limiting and collision avoidance depend on machine learning or on conventional safety logic.
  • Expect a gap period. From 20 January 2027 the Regulation applies, but standards that cover learning safety systems are still missing, so declarations may rely on the manufacturer's own technical solutions.
  • Look for the notified body number. Where a learning system ensures safety, the CE marking should be followed by a notified body's identification number.
  • Plan the site as if the robot can surprise you. Clear zones, a trained operator with an emergency stop, and the checks in our public event safety planning guide apply whatever the paperwork says.
  • Put it in the brief. Ask for the declaration of conformity and safety documentation up front; our guide on what to include in a request to a robot supplier shows where.

Frequently asked questions

Does every robot with AI need a notified body under the Machinery Regulation?

No. Third-party assessment under Annex I, Part A applies to safety components, and embedded systems, with fully or partially self-evolving behaviour using machine learning that ensure safety functions. The Regulation's recitals say software that cannot learn and only runs programmed automated functions is not covered. A robot that uses machine learning for movement but relies on conventional logic for its safety functions would generally be assessed differently.

Are there harmonised standards for self-learning machinery yet?

Not as far as we could confirm in November 2026. The Commission has requested standards in support of the Regulation and says its first list under the Regulation is being prepared, mostly carrying over standards from the old Machinery Directive. Those older standards were not written for the self-evolving requirements in Annex III, section 1.2.1, so manufacturers may need their own documented technical solutions for now.

What did the 2026 AI Omnibus change for machinery?

Regulation (EU) 2026/1744 moved machinery to Section B of Annex I to the AI Act, so AI in machinery is handled mainly through machinery law. It requires the Commission to add AI requirements to Annex III of the Machinery Regulation through delegated acts that must apply by 2 August 2028. Until then, AI Act harmonised standards can give presumption of conformity for those AI requirements.

What can the Commission do if machinery standards arrive late?

Article 20(3) allows the Commission to adopt common specifications by implementing act. It can only do this if a standardisation request was refused, its deadline was missed or the delivered standards do not match it, and no suitable standard is expected soon. Machinery that follows common specifications is presumed to meet the requirements they cover, in the same way as with harmonised standards.

How this article was made: written by the humanoid4rent editorial team with AI assistance; every factual statement was checked against the sources listed below on 2026-11-11. Spotted an error? Write to info@humanoid4rent.com.

Fonti

I fatti riportati in questo articolo sono stati verificati su queste pagine nel giorno in cui è stato scritto.

  1. Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery – EUR-Lex
  2. Corrigendum to Regulation (EU) 2023/1230 on machinery – EUR-Lex
  3. Regulation (EU) 2026/1744 amending Regulations (EU) 2024/1689, (EU) 2018/1139 and (EU) 2023/1230 (Digital Omnibus on AI) – EUR-Lex
  4. Harmonised standards – Machinery – European Commission
  5. Commission Implementing Decision (EU) 2026/2015 as regards harmonised standards for machinery drafted in support of Directive 2006/42/EC – EUR-Lex
  6. Commission Notice – The 2026 annual Union work programme for European standardisation – EUR-Lex
  7. Horizontal Recommendation for Use Sheets (RfUs) related to Machinery Regulation (EU) 2023/1230, status May 2026 – European Co-ordination of Notified Bodies for Machinery / European Commission
  8. Guide to the application of the Machinery Regulation (EU) 2023/1230 – temporary and partial publication – European Commission

Altri contenuti dal blog

Desiderate un robot al Vostro prossimo evento?

Descrivete una sola volta la data, il luogo e ciò che il robot dovrà fare. I fornitori risponderanno con preventivi che potrete confrontare in modo omogeneo.

Invia una richiesta

Lavorate nella robotica? Scrivete per il nostro blog. →