ISO 10218 revised: what the 2025 edition changes for robots working near people
The industrial robot safety standard ISO 10218 was revised in 2025. Here is what changed for robots working near people, and why humanoids at events sit largely outside it.
Autor: Redakcja humanoid4rent · opublikowano 7 listopada 2026
ISO 10218, the main international safety standard for industrial robots, was republished in two parts on 5 February 2025. The revision folds the former collaborative-robot guidance into the standard itself, treats "collaborative" as a property of an application rather than of a robot, and adds cybersecurity. It is written for factory robots, so humanoids at public events sit largely outside its scope.
For anyone booking a robot for an event, that distinction matters. Suppliers increasingly cite standards in their safety documentation, and it helps to know what a reference to ISO 10218 does and does not tell you.
What ISO 10218 is and what was published in 2025
The standard has two parts. BSI, the UK national standards body, lists ISO 10218-1:2025, Robotics – Safety requirements – Industrial robots with a publication date of 5 February 2025. It covers the design of the robot itself, which the standard treats as an incomplete machine that only becomes a working system once it is integrated with tools and surroundings.
The second part, ISO 10218-2:2025, Industrial robot applications and robot cells, was published on the same date. It addresses the people who integrate robots into a working cell: guarding, layout, safety functions and how the whole application is validated.
The Association for Advancing Automation (A3), which administers the US national adoption, described it as the first major revision since 2011, as reported by Manufacturing AUTOMATION on 18 February 2025. A3 said at the time that the text would be adopted as ANSI R15.06 in the United States and CSA Z434 in Canada.
The main changes in the 2025 edition
According to the A3 announcement summarised by Manufacturing AUTOMATION, the revision brings together material that used to be spread across several documents. The headline changes are:
- Functional safety made explicit. Requirements for safety functions are now stated directly rather than implied, which A3 said should make compliance clearer for manufacturers and integrators.
- Collaborative guidance absorbed. The content of ISO/TS 15066, the 2016 technical specification on collaborative robots, has been integrated into the standard.
- End-of-arm tooling. Guidance on grippers and other tools, and on manual loading and unloading, which previously sat in separate technical reports, is now included.
- Robot classes. New robot categories come with matching functional safety requirements.
- Cybersecurity. Requirements now address security threats that could affect safety.
In an interview published by the sensor maker SICK in September 2025, an application engineer explained that Part 1 now distinguishes two robot classes, because large, heavy industrial arms behave very differently from small, low-force arms built for collaborative work. He also said the previous blanket requirement for safety functions to reach performance level d (a measure of how reliably a safety function must work) has been replaced by a determination based on the actual application's risks. The same interview notes clearer requirements for reduced speed and motion monitoring in teach mode, when a person programmes the robot at close range.
From "collaborative robot" to "collaborative application"
The change most relevant to robots working near people is about vocabulary, and it has practical consequences. As IDEC explains in its analysis of the revision, the 2025 standard no longer uses the term "collaborative robot". It speaks instead of a collaborative application: one that contains collaborative tasks, in which the robot application and one or more operators are inside the same safeguarded space.
The logic is that safety depends on the whole set-up, not on the arm alone. A small, force-limited arm holding a sharp tool at head height is not safe simply because the arm is marketed as a cobot. Under the revised standard, only the application, meaning the robot system, its tooling, the workpiece, the task programme and the surrounding machinery, can be assessed and confirmed as collaborative.
Because the ISO/TS 15066 material now sits inside the standard, its biomechanical limits, which SICK describes as the permitted forces and pressures if a robot and a person collide, are part of the normative framework rather than a separate supplement.
For event organisers, the takeaway is simple: a label such as "collaborative" or "cobot" on a robot is not, under the current standard, a safety claim about any particular use. What matters is the risk assessment for the specific set-up.
Where the revised standard stands in the EU
In the European Union, standards give a presumption of conformity with legal safety requirements only once the Commission cites them in the Official Journal. Commission Implementing Decision (EU) 2026/2015, dated 4 September 2026 and published on 7 September 2026, added EN ISO 10218-1:2025 and EN ISO 10218-2:2025 to the list of harmonised standards under the Machinery Directive 2006/42/EC, with no restrictions noted.
The same Decision repeals the earlier listing with effect from 20 January 2027, the date from which the new Machinery Regulation (EU) 2023/1230 applies. In other words, this citation relates to the Directive; machinery placed on the market from that date is assessed against the Regulation, and suppliers will need to check which standards are cited under it. The broader changes are covered in our article on the Machinery Regulation and humanoid robots.
This article is general information, not legal advice; responsibility for conformity lies with the manufacturer and, for a specific deployment, with whoever carries out the risk assessment.
Does ISO 10218 apply to humanoids and mobile robots?
Mostly not, and the standard says so itself. The scope of Part 1, as summarised on the BSI catalogue page, excludes service robots and consumer robots, along with medical, military, underwater and several other categories. It also states that it does not address hazards from mobile platforms or from situations where the public has access.
A humanoid on a stand at a trade fair or walking through a foyer combines several things the standard leaves out: it moves around on its own, it is often not an industrial application, and it operates among members of the public rather than trained operators. A walking humanoid also faces a hazard that a fixed arm does not: it can fall.
Industry groups are working on that gap. Agility Robotics, which builds the warehouse humanoid Digit, notes in a June 2026 article on humanoid safety that voluntary standards have historically split robots into industrial and service robots, and that humanoids blur that line. It points to ISO 25785-1 and the ANSI/A3 technical report R15.108, which cover safety requirements for dynamically stable industrial mobile robots, meaning robots that must actively balance. Our article on ISO 25785-1 and legged robots follows its status.
For service robots in public and personal settings, the established reference is ISO 13482 on personal care robots. IEEE Spectrum reported in May 2026 that the standard, then 12 years old, was heading for revision, and quoted a researcher saying that it lacks binding test methods for some interaction hazards. See our explainer on ISO 13482 for what it covers.
Why a supplier might still cite ISO 10218
There are legitimate reasons for a reference to ISO 10218 in an event robot's documentation. Some humanoids and mobile manipulators have arms whose design draws on industrial practice, and the 2025 edition's thinking about contact forces, safety functions and application-level risk assessment is a useful reference point even outside a factory.
The problem arises when the reference is used as if it settled the question. A statement that a robot "complies with ISO 10218" says nothing about whether it is safe to walk among guests, how it behaves if it loses balance, or how close visitors may come. Those questions belong to the risk assessment for the venue and the programme.
What this means for event organisers
- Ask which standards and editions the supplier relies on, and for which parts of the robot. A precise answer, such as the 2025 edition of ISO 10218 for the arm design plus a separate site risk assessment, is more informative than a list of standard numbers.
- Treat "collaborative" as a description of a set-up, not of a robot. Ask for the risk assessment of your specific format: distances, speeds, who may touch the robot and what happens if it falls.
- Do not read ISO 10218 as covering public events. Its own scope excludes public-access situations and mobile platforms, so ask how the supplier manages crowds, barriers and stop procedures. Our planning guide to robot safety at public events sets out the practical steps.
- Request the paperwork that matters in the EU, such as the manufacturer's declaration of conformity; our article on what CE marking does and does not tell you explains how to read it.
- Put safety questions in your brief from the start. The guide on what to put in a request to a robot supplier shows how to include venue, audience and contact expectations so quotes cover them.
Frequently asked questions
When was the revised ISO 10218 published?
Both parts of the revised standard, ISO 10218-1:2025 for industrial robots and ISO 10218-2:2025 for robot applications and robot cells, were published on 5 February 2025, according to the BSI catalogue. A3 described it as the first major revision since 2011. National adoptions followed, including ANSI R15.06 in the United States and CSA Z434 in Canada, which A3 said would be updated during 2025.
Is ISO/TS 15066 still needed for collaborative robots?
According to A3 and to explainers by SICK and IDEC, the content of ISO/TS 15066, including its biomechanical limits for contact forces and pressures, has been integrated into the 2025 edition of ISO 10218. Integrators therefore find the collaborative requirements within ISO 10218 itself. Anyone working to an older contract or specification should check which documents and editions it refers to.
Does the 2025 ISO 10218 still use the term collaborative robot?
No. As IDEC explains, the revised standard speaks of collaborative applications instead, meaning applications in which a robot and people share the same safeguarded space for some tasks. Only the whole application, including tooling, workpiece and task programme, can be assessed as collaborative. A robot sold as a cobot is therefore not automatically safe for every use.
Does ISO 10218 cover humanoid robots at events?
Largely not. The scope of ISO 10218-1:2025 excludes service and consumer robots and states that it does not address hazards from mobile platforms or public-access situations. Walking humanoids also face fall hazards that a fixed arm does not. Separate work, such as ISO 25785-1 for dynamically stable industrial mobile robots, addresses some of these gaps, and each event set-up still needs its own risk assessment.
Is EN ISO 10218:2025 a harmonised standard in the EU?
Yes, under the Machinery Directive. Commission Implementing Decision (EU) 2026/2015, published on 7 September 2026, cited EN ISO 10218-1:2025 and EN ISO 10218-2:2025. That listing ends on 20 January 2027, when the Machinery Regulation (EU) 2023/1230 applies, so manufacturers should check the citations under the Regulation. This is general information, not legal advice.
How this article was made: written by the humanoid4rent editorial team with AI assistance; every factual statement was checked against the sources listed below on 2026-11-07. Spotted an error? Write to info@humanoid4rent.com.
Źródła
Fakty przedstawione w tym artykule zostały sprawdzone na podstawie tych stron w dniu jego powstania.
- ISO 10218-1:2025 Robotics. Safety requirements – Industrial robots – BSI Knowledge
- ISO 10218-2:2025 Robotics. Safety requirements – Industrial robot applications and robot cells – BSI Knowledge
- A3 Publishes Updated ISO 10218: Enhancing Safety For Industrial Robots – Manufacturing AUTOMATION
- What You Need to Know about the ISO 10218:2025 Standard – SICK Sensor Connection
- Behind the ISO 10218 series safety standards updates in 2025 (article 2 of 2) – IDEC
- Commission Implementing Decision (EU) 2026/2015 of 4 September 2026 amending and repealing Implementing Decision (EU) 2023/1586 as regards harmonised standards for machinery – EUR-Lex
- Built for the Real World – Agility Robotics
- Home Robot Safety Is All About Relationships – IEEE Spectrum
Więcej z bloga
Chcą Państwo robota na swoim następnym wydarzeniu?
Wystarczy raz opisać termin, miejsce i zadania robota. Dostawcy odpowiedzą ofertami, które będzie można porównać punkt po punkcie.
Wyślij zapytanie